DIGI-SYS HP Distributor-3D is a 1U rack-mount unit, which accepts AES/EBU, SPDIF & Analogue
inputs in the form of Balanced and Unbalanced with its inputs selection switches. It produced analog
output through professional TRS jack which can drive all types of stereo headphone with its volume
control.DIGI-SYS HP Distributor-3D accepts balanced AES/EBU signal and SPDIF unbalanced signal in
addition to stereo balanced input, with Sample Rate Frequency range from 16 KHz to 192 KHz. This unit
has Superior performance with excellent signal to noise ratio and low distortion. Stereo analogue inputs
have fine ±20dB pre-set analog level controls additional with ±20dB digital gain control. The large
dynamic range is optimized by microcontroller with full scale resolution as per user requirements.
DIGI-SYS HP Distributor-3D has excellent overall frequency response and very low distortion, which
has been achieved by selectively mixing integrated circuits and discrete devices. Extremely low internal
noise levels achieved, also allow perfect recovery from week digital signals in the range of 100 mV.
The unit is housed in a 19” rack mount chassis with power connections as per IEC recommendation.
Analog + AES/EBU +SPDIF inputs
Adjustable Analog Gain ±20 dB
24 bit capability
Ultra Low Noise DAC.
Interactive controls
Excellent Frequency Response.
Extremely Low Distortion.
High signal isolation (transformers)
Short Circuit Protected.
Stabilized Power Supply.
Digital Input |
|
Digital input | 1x AES/EBU XLR F 3 pin, 1x S/PDIF BNC |
Digital input sample rate Input lock range Digital input signal resolution Digital input amplitude Digital input Impedance
| 16 KHz to 216 KHz auto detect and Displayed ±2% of standard sample rates. 16-24 bit 200 mV min. (90 mV typical), 5 V PP max. 110Ω balanced, 75Ω unbalanced |
Analog Input |
|
Analog input | 2x XLR F (balanced), |
Input impedance Input level | >10kΩ balanced 0dBu nom. +20dBu max. |
Gain range
Analog Output
Analogue output Max output level Head phone Impedance Frequency Response Signal to noise Ratio Channel matching Dynamic range
| ±20 dB analog, ±20 dB digital
8x Head Phone Jack. 24dBu active balanced 32 Ω or higher ±0.25dB (20Hz to 20KHz) 105 dB ( 0dBFS) ±0.25dB (20Hz to 20KHz) >110dB |
Mechanical Power
Size – HxWxD
|
230 V 10%, 50 Hz, 20VAMax 110 /230 V 10%, 50/60Hz 20VA Max (optional) 44.5mm x 483mm x 203mm(1.75″X19″X8″) Standard 19″ rack mounts. |
Copyright © Digital System Solutions 2018-Developed By DIGI-SYS Privacy Policy